Asus KFN4-D16 - Extended User Manual Download Page 49

Page: 49 / 142

ASUS KFN4-D16 Series

2-29

4. Serial ATA connectors

(4 SATA SATA1, SATA2, SATA3, SATA4)
Supported by the NVIDIA

CK804 Professional chipset, these

connectors are for the Serial ATA signal cables for Serial ATA hard

disk drives that allows up to 3Gb/s of data transfer rate.
If you installed Serial ATA hard disk drives, you can create a RAID 0,

RAID 1, RAID 0+1, RAID 5, or JBOD configuration. Refer to Chapter 5

for details on how to set up the RAID configurations.

The actual data transfer rate depends on the speed of Serial ATA hard

disks installed.

These connectors are set to SATA by default. In SATA mode, you can

connect Serial ATA boot or data hard disk drives to these connectors.

If you intent to create a Serial ATA RAID set using these connectors,

enable the RAID function of each port from the nVidia RAID Setup

sub-menu item in the BIOS. See section “4.3.5 IDE Configuration” on

page 4-14 for details.

5. CPU, Front and Rear fan connectors

(4-pin CPU_FAN1/2, 3-pin FRNT_FAN1/2,

3-pin REAR_FAN1/2)
The fan connectors support cooling fans of 350mA~2000mA (24

W max.) or a total of 1A~3.48A (41.76 W max.) at +12V. Connect

the fan cables to the fan connectors on the motherboard, making

sure that the black wire of each cable matches the ground pin of the

connector.

SATA1

SATA3

SATA2

SATA4

KFN4-D16 (Series) SATA connectors

Summary of Contents for KFN4-D16 - Extended















































































































































Search results

Summary of Contents for KFN4-D16 - Extended

Reviews:

Related manuals for KFN4-D16 - Extended

Brands by name

Popular brands

Asus KFN4-D16 - Extended, User Manual

Search results

Summary of Contents for KFN4-D16 - Extended

Reviews:

Related manuals for KFN4-D16 - Extended

Brands by name

Popular brands