Asus KFN4-D16 - Extended User Manual Download Page 33

Page: 33 / 142

ASUS KFN4-D16 Series

2-13

5. When the fan and heatsink assembly is in place, connect the CPU fan

cable to the appropriate connector on the motherboard, CPU_FAN1 or

CPU_FAN2.

• Do not forget to connect the CPU fan connector! Hardware

monitoring errors can occur if you fail to plug this connector.

• If there is only one CPU fan cable, connect it to the connector

labeled CPU_FAN1. Failure to do so may cause hardware monitoring

errors.

KFN4-D16/SAS

KFN4-D16 (Series) CPU Fan Connectors

CPU_FAN2

CPU_FAN1

GND

CPU F

AN PWR

CPU F

AN IN

CPU F

AN PWM

GND

CPU FAN PWR

CPU FAN IN

CPU FAN PWM

2.4

System memory

2.4.1 Overview

The motherboard comes with sixteen 240-pin Double Data Rate II (DDR2)

Dual Inline Memory Modules (DIMM) sockets.

The following figure illustrates the location of the sockets:

KFN4-D16/SAS

KFN4-D16 (Series) 240-pin DDR2 DIMM Sockets

112 Pins

128 Pins

DIMM_A4
DIMM_B3
DIMM_A3

DIMM_B4

DIMM_A2
DIMM_B1
DIMM_A1

DIMM_B2

DIMM_B5
DIMM_A6
DIMM_B6

DIMM_A5

DIMM_B7
DIMM_A8
DIMM_B8

DIMM_A7

Summary of Contents for KFN4-D16 - Extended















































































































































Search results

Summary of Contents for KFN4-D16 - Extended

Reviews:

Related manuals for KFN4-D16 - Extended

Brands by name

Popular brands

Asus KFN4-D16 - Extended, User Manual

Search results

Summary of Contents for KFN4-D16 - Extended

Reviews:

Related manuals for KFN4-D16 - Extended

Brands by name

Popular brands