Asus KFN4-D16 - Extended User Manual Download Page 132

Page: 132 / 142

ASUS KFN4-D16 Series

6-5

5.  Right-click the RAID controller item, then select Properties.
6.  Click the Driver tab, then click the Update Driver button.
7.  The

Upgrade Device Driver Wizard

window appears. Click Next.

8. Insert the RAID driver disk you created earlier to the floppy disk drive.

9. Select the option “Search for a suitable driver for my device

(recommended)”, then click Next.

10. The wizard searches the

RAID controller drivers. When

found, click Next to install the

drivers.

11. Click Finish after the driver

installation is done.

To verify the RAID controller driver installation:

1. Right-click the My Computer icon on the Windows

desktop , then

select Properties from the menu.

2. Click the Hardware tab, then click the Device Manager button.
3. Click the “+” sign before the item SCSI and RAID controllers.

Summary of Contents for KFN4-D16 - Extended















































































































































Search results

Summary of Contents for KFN4-D16 - Extended

Reviews:

Related manuals for KFN4-D16 - Extended

Brands by name

Popular brands

Asus KFN4-D16 - Extended, User Manual

Search results

Summary of Contents for KFN4-D16 - Extended

Reviews:

Related manuals for KFN4-D16 - Extended

Brands by name

Popular brands