![background image](http://html.mh-extra.com/html/asus/h170i-plus-d3/h170i-plus-d3_user-manual_25421065.webp)
2.6.5
PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Hyper Kit Mode [Disabled]
Disable this option for M.2 devices. Enable this option for ASUS Hyper Kit card. Configuration
options: [Disabled] [Enabled]
SATA Controller(s) [Enabled]
This item allows you to enable or disable the SATA device. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
Allows you to set the SATA configuration.
[Disabled]
Disables the SATA function.
[IDE]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]
Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
[RAID]
Set to [RAID Mode] when you want to create a RAID configuration from the
SATA hard disk drives.
M.2 PCIE Storage RAID Support [Enabled]
Enable this item to remap PCIE port to SATA for RAID support. Only six (6) SATA ports will
remain when enabling this item. Configuration options: [Disabled] [Enabled]
CR#1 - Remap Port Selection [Disabled]
This item allows you to select the port for RST PCIe Storage Remapping. Configuration
options: [Auto] [Port 9] [Port 10] [Port 11] [Port 12]
Aggressive LPM Support [Disabled]
This item appears only when you set the previous item to [AHCI] or [RAID] and allows you
to enable or disable PCH entering link power state aggressively. Configuration options:
[Disabled] [Enabled]
SMART Self Test [On]
SMART (Self‑Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power‑on Self Test) when an error occurs in the
hard disks. Configuration options: [On] [Off]
Hot Plug [Disabled] (SATA6G_3 (Gray) ~ SATA6G_6(Gray))
These items allow you to enable/disable SATA Hot Plug Support. Configuration options:
[Disabled] [Enabled]
ASUS H170I-PLUS D3
2‑31
Summary of Contents for H170I-PLUS D3
