Asus ESC510 G4 SFF User Manual Download Page 59

Page: 59 / 134

ASUS ESC510 G4

3-17

13. M.2 socket 3

This socket allows you to install an M.2 (NGFF) SSD module.

•

This socket supports M Key and type 22110/2280/2260/2242 storage devices.

•

This socket supports PCIe and SATA modes.

•

The M.2 (NGFF) device is purchased separately.

•

When the M.2 connector is operating in SATA mode, SATA connector 8 (SATA6G_8)

will be disabled.

14. Chassis intrusion connector (2-pin INTRUSION)

These leads are for the intrusion detection feature for chassis with intrusion sensor

or microswitch. When you remove any chassis component, the sensor triggers and

sends a high level signal to these leads to record a chassis intrusion event. The default

setting is short CHASSIS# and GND pin by jumper cap to disable the function.

Summary of Contents for ESC510 G4 SFF







































































































































Search results

Summary of Contents for ESC510 G4 SFF

Reviews:

Related manuals for ESC510 G4 SFF

Brands by name

Popular brands

Asus ESC510 G4 SFF, User Manual

Search results

Summary of Contents for ESC510 G4 SFF

Reviews:

Related manuals for ESC510 G4 SFF

Brands by name

Popular brands