Asus ESC510 G4 SFF User Manual Download Page 31

Page: 31 / 134

2-13

ASUS ESC510 G4 SFF

Secure the HDD with four (4) screws

into the screw holes shown in the

illustration.

Connect the SATA cable to the

SATA connector of the drive.

Connect a SATA power cable from

the power supply to the power

connector of the drive.

Reinstall the assembly module and

front panel cover. Refer to

2.5.2

Replacing the assembly module and
front cover

for more information.

Remove the assembly module from

the chassis. Refer to

2.5.1 Removing

the assembly module

for more

information.

Insert and carefully push the HDD

into the bay until its screw holes align

with the holes on the bay.

To install a 3.5-inch Serial ATA hard disk drive to the left HDD bay:

Screw holes

Summary of Contents for ESC510 G4 SFF







































































































































Search results

Summary of Contents for ESC510 G4 SFF

Reviews:

Related manuals for ESC510 G4 SFF

Brands by name

Popular brands

Asus ESC510 G4 SFF, User Manual

Search results

Summary of Contents for ESC510 G4 SFF

Reviews:

Related manuals for ESC510 G4 SFF

Brands by name

Popular brands