Chapter 2: Hardware Setup
2-12
2.8
Hard disk drives (HDD)
The server system supports two (2) 3.5-inch Serial ATA hard disk drives via the assembly
module.
To install a 3.5-inch Serial ATA hard disk drive to the right HDD bay:
3.
Secure the HDD with two (2) screws
into the screw holes on the right side
of the assembly module.
4.
Connect the SATA cable to the
SATA connector of the drive.
5.
Connect a SATA power cable from
the power supply to the power
connector of the drive.
6.
Reinstall the assembly module and
front panel cover. Refer to
2.5.2
Replacing the assembly module and
front cover
for more information.
Screw holes
1.
Remove the assembly module from
the chassis. Refer to
2.5.1 Removing
the assembly module
for more
information.
2.
Insert and carefully push the HDD
into the bay until its screw holes align
with the holes on the bay.
Summary of Contents for ESC510 G4 SFF
