Asus ESC510 G4 SFF User Manual Download Page 20

Page: 20 / 134

Chapter 2: Hardware Setup

2-2

2.1

Chassis cover

2.1.1

Removing the chassis cover

•

Ensure that you unplug the power cord before removing the chassis cover.

•

Take extra care when removing the chassis cover. Keep your fingers from components

inside the chassis that can cause injury, such as the CPU fan, rear fan, and other

sharp-edged parts.

•

The images of the workstation shown in this section are for reference purposes only

and may not exactly match the model you purchase.

To remove the chassis cover:

Remove the four (4) screws that secure the chassis cover.

Slightly pull the chassis cover toward the rear just enough to detach it from the chassis,

then lift to remove the chassis cover.

Summary of Contents for ESC510 G4 SFF







































































































































Search results

Summary of Contents for ESC510 G4 SFF

Reviews:

Related manuals for ESC510 G4 SFF

Brands by name

Popular brands

Asus ESC510 G4 SFF, User Manual

Search results

Summary of Contents for ESC510 G4 SFF

Reviews:

Related manuals for ESC510 G4 SFF

Brands by name

Popular brands