Asus ESC4000 G3 Series User Manual Download Page 134

Page: 134 / 206

5-50

Chapter 5: BIOS setup

Pressing <Esc> does not immediately exit this menu. Select one of the options from this

menu or <F10> from the legend bar to exit.

5.12

Exit menu

The Exit menu items allow you to save or discard your changes to the BIOS items.

Save Changes & Reset

Exit System setup after saving the changes.

Discard Changes & Exit

Exit System setup without saving any changes.

Save Changes & Reset

Reset the system setup after saving the changes.

Discard Changes & Reset

Reset system setup without saving any changes.

Save Options

Save Changes

Save changes done so far to any of the setup options.

Discard Changes

Discard changes done so far to any of the setup options.

Summary of Contents for ESC4000 G3 Series















































































































































































































Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Related manuals for ESC4000 G3 Series

Brands by name

Popular brands

Asus ESC4000 G3 Series, User Manual

Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Related manuals for ESC4000 G3 Series

Brands by name

Popular brands