Asus ESC4000 G3 Series User Manual Download Page 79

Page: 79 / 206

ASUS ESC4000 G3/G3S Series

4-13

SSI power connectors (20-pin PWR1, 8-pin PWR2)

These connectors are for an SSI power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation and

push down firmly until the connectors completely fit.

•

DO NOT forget to connect the 20+8-pin power plugs; otherwise, the system will not

boot up.

•

Use of a PSU with a higher power output is recommended when configuring a system

with more power-consuming devices. The system may become unstable or may not

boot up if the power is inadequate.

•

Ensure that your power supply unit (PSU) can provide at least the minimum power

required by your system.

Summary of Contents for ESC4000 G3 Series















































































































































































































Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Related manuals for ESC4000 G3 Series

Brands by name

Popular brands

Asus ESC4000 G3 Series, User Manual

Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Related manuals for ESC4000 G3 Series

Brands by name

Popular brands