Asus ESC4000 G3 Series User Manual Download Page 169

Page: 169 / 206

ASUS ESC4000 G3/G3S Series

6-33

6.3.7

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-

RAID using the Intel

Rapid Storage Technology enterprise SATA Option ROM utililty.

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

Reboot the system and press <Del> to enter the BIOS setup utility during POST.

Go to the Boot menu and select the boot option priority.

Use up/down arrow keys to select the boot priority and press <Enter>. See the Boot

menu section of Chapter 4 for more details.

From the Exit menu, select

Save Changes & Exit

, then press <Enter>.

When the confirmation window appears, select

Yes

, then press <Enter>.

Summary of Contents for ESC4000 G3 Series















































































































































































































Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Related manuals for ESC4000 G3 Series

Brands by name

Popular brands

Asus ESC4000 G3 Series, User Manual

Search results

Summary of Contents for ESC4000 G3 Series

Reviews:

Related manuals for ESC4000 G3 Series

Brands by name

Popular brands