Asus ESC4000 G2 GPU User Manual Download Page 19

Page: 19 / 162

ASUS ESC4000 Series

1-7

1.6

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive. Connect a USB floppy

disk drive to any of the USB ports on the front or rear panel if you need to use a

floppy disk.

*WARNING

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY

1. Redundant Power

supply and power fan

(hidden)

2. ASUS Z8PG-D18

Server Board

3. System fans

4. SATA/SAS backplane

(hidden)

5. Hot-swap HDD tray 1–8

(SAS and SATA)

6. Slim-type optical drive

bay

7. Front I/O board (hidden)

8. PCI-E Expansion

Boards (hidden)

A protection film is pre-attached to the front cover before shipping. Please

remove the protection film before turning on the system for proper heat

dissipation.

Summary of Contents for ESC4000 G2 GPU



































































































































































Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands

Asus ESC4000 G2 GPU, User Manual

Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands