Asus ESC4000 G2 GPU User Manual Download Page 74

Page: 74 / 162

5-4

Chapter 5: BIOS setup

5.1.2

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. You can

update a corrupted BIOS file using a USB flash drive that contains the updated

BIOS file.

Prepare a USB flash drive containing the updated motherboard BIOS before

using this utility.

To recover the BIOS using ASUS CrashFree BIOS 3
1.  Insert the USB flash disk that contains the BIOS file to the USB port.
2.  Turn on the system.
3.  The utility will automatically checks the devices for the BIOS file. When found,

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4. Restart the system after the utility completes the updating process.

DO NOT shut down or reset the system while recovering the BIOS! Doing so

would cause system boot failure!

The recovered BIOS may not be the latest BIOS version for this motherboard.

Visit the ASUS website (www.asus.com) to download the latest BIOS file.

Summary of Contents for ESC4000 G2 GPU



































































































































































Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands

Asus ESC4000 G2 GPU, User Manual

Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands