Asus ESC4000 G2 GPU User Manual Download Page 138

Page: 138 / 162

7-2

Chapter 7: Driver installation

7.1

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install

an operating system to the independent hard disk drive or bootable array. This

part provides instructions on how to install the RAID controller drivers during OS

installation.

7.1.1

Creating a RAID driver disk

The system does not include a floppy drive. You have to use a USB floppy drive

when creating a SATA RAID driver disk.

If you have created RAID sets with the LSI Software RAID configuration utility,

the boot priority of the SATA optical disk drive has to be manually adjusted.

Otherwise, the system will not boot from the connected SATA ODD.

A floppy disk with the RAID driver is required when installing Windows

XP / Server

2003 or Linux operating system on a hard disk drive that is included in a RAID set.

You can create a RAID driver disk in DOS (using the Makedisk application in the

support DVD).
To create a RAID driver disk in DOS environment
1. Place the motherboard support DVD in the optical drive.

2. Restart the computer, and then enter the BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the support DVD.

Save your changes, and then exit the BIOS Setup.

4. Restart the computer. The Makedisk menu appears.

Create Driver Diskette Menu

ICH10R INTEL RAID Driver

ICH10R LSI RAID Driver

ITE IT8213F Linux Driver

Write DMI

FreeDOS command prompt

5. Use the arrow keys to select the type of RAID driver disk you want to create

and press <Enter> to enter the sub-menu.

Summary of Contents for ESC4000 G2 GPU



































































































































































Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands

Asus ESC4000 G2 GPU, User Manual

Search results

Summary of Contents for ESC4000 G2 GPU

Reviews:

Related manuals for ESC4000 G2 GPU

Brands by name

Popular brands