manualshive.com logo in svg

Asus ESC1000 G2, User Manual

Share
Download
Asus ESC1000 G2 User Manual Download Page 189

7-6

Chapter 7: Multiple GPU technology support

4. 

Align and irmly insert the SLI bridge connector to the goldingers on each graphics 

card. Ensure that the connector is irmly in place.

5.   Connect two independent auxiliary power sources from the power supply to the two 

graphics cards separately.

6. 

Connect a VGA or a DVI cable to the graphics card.

Goldingers

SLI bridge

7.2.3 

Installing three SLI-ready graphics cards

3-Way SLI bridge

1.  

Prepare three SLI-ready graphics cards.

2. 

Insert the three graphics card into the 

PCIEX16 slots. If your motherboard 

has more than two PCIEX16 slots, 

refer to Chapter 2 in this user manual 

for the locations of the PCIEX16 slots 

recommended for multi-graphics card 
installation.

3. 

Ensure that the cards are properly 
seated on the slots.

4. 

Align and irmly insert the 3-Way SLI 

bridge connector to the goldingers on 

each graphics card. Ensure that the 

connector is irmly in place.

5.   Connect three independent auxiliary 

power sources from the power supply to 
the three graphics cards separately.

6. 

Connect a VGA or a DVI cable to the 

graphics card.

Summary of Contents for ESC1000 G2




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands