Asus ESC1000 G2 User Manual Download Page 158

Page: 158 / 195

ASUS ESC1000 G2

6-3

6.1.3

Installing the RAID driver during Windows

OS installation

To install the RAID driver in Windows

XP:

1. During the OS installation, the system prompts you to press the F6 key to install third-

party SCSI or RAID driver.

2. Press <F6>, and then insert the loppy disk with RAID driver into the USB loppy disk drive.
3.

When prompted to select the SCSI adapter to install, select the RAID driver for the

corresponding OS version.

4. Follow the succeeding screen instructions to complete the installation.

To install the RAID driver for Windows

Vista or later OS:

During the OS installation, click

Load Driver

to allow you to select the installation

media containing the RAID driver.

2. Insert the USB lash drive with RAID driver into the USB port or the support DVD into

the optical drive, and then click

Browse

Click the name of the device you’ve inserted, go to

Drivers

RAID

, and then select

the RAID driver for the corresponding OS version. Click

4. Follow the succeeding screen instructions to complete the installation.

Before loading the RAID driver from a USB lash drive, you have to use another computer

to copy the RAID driver from the support DVD to the USB lash drive.

6.1.4

Using a USB loppy disk drive

Due to OS limitation, Windows

XP may not recognize the USB loppy disk drive when you

install the RAID driver from a loppy disk during the OS installation.
To solve this issue, add the USB loppy disk drive’s Vendor ID (VID) and Product ID (PID) to

the loppy disk containing the RAID driver. Refer to the steps below:

Using another computer, plug the

USB loppy disk drive, and insert

the loppy disk containing the RAID

driver.

Right-click

My Computer

on the

Windows

desktop or

start

menu,

and then select

Manage

from the

pop-up window.

Summary of Contents for ESC1000 G2




































































































































































































Search results

Summary of Contents for ESC1000 G2

Reviews:

Brands by name

Popular brands

Asus ESC1000 G2, User Manual

Search results

Summary of Contents for ESC1000 G2

Reviews:

Brands by name

Popular brands