manualshive.com logo in svg

Asus ESC1000 G2, User Manual

Share
Download
Asus ESC1000 G2 User Manual Download Page 126

ASUS ESC1000 G2

4-43

Power On By Mouse [Disabled]

[Disabled] 

 Disables the mouse device from generating a wake event.

[Enabled] 

 Enables the mouse device to generate a wake event: 

Power On By PCIE [Disabled]

[Disabled] 

 Disables the PCIE devices from generating a wake event.

[Enabled] 

 Enables the PCIE devices to generate a wake event.

Power On By Ring [Disabled]

[Disabled] 

 Disables the Ring device from generating a wake event.

[Enabled] 

 Enables the Ring device to generate a wake event.

Power On By RTC [Disabled]

[Disabled] 

Disables RTC from generating a wake event.

[Enabled] 

When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/

Second will become user-conigurable with set values. Use <+> and <-> 

keys to adjust the values. 

ErP Ready [Disabled]

This item allows user to switch off some power at S5 to get the system ready for ErP 

requirement. When set to Enabled, all other PME options will be switched off.
Coniguration options: [Disabled] [Enabled]

Summary of Contents for ESC1000 G2




































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands