DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
33
1. Click
Advanced Setup -> NAT -> Port Triggering
in the left side menu to open the
configuration page. Click
Add
to create a new rule.
2. Select the service you want to configure and let the system automatically fill in the
external and internal port number and protocol type. You can also select
Custom
Server
radio button to designate a certain known server.
3. Fill in trigger port (range) and protocol, open port (range) and protocol for the
service if you select
Custom Server
radio button.
4. Press
Save/Apply
to save and activate the settings.
Setting up virtual server
Vitual server allows directing WAN incoming traffic to hosts or servers using private IP
addresses within a LAN. With virtual server, the router checks the port number of the
packets sent to the WAN interface, translates the port numbers into private IP address,
and redirects the packets to the corresponding internal hosts and servers. DSL-N13
supports up to 32 virtual server entries. To set up virtual server:
1. Click
Advanced Setup -> NAT -> Virtual Server
in the left side menu to open the
configuration page. Click
Add
to create a new rule.
2. Select the service you want to configure and let the system automatically fill in the
external and internal port number and protocol type. You can also select
Custom
Server
radio button to designate a certain known server.
3. Fill in external port (range), internal port (range), and protocol for the service if you
select
Custom Server
radio button.
4. Fill the
Server IP Address
box with the network address of the host or server within
your LAN.
5. Press
Save/Apply
to save and activate the settings.