DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
26
MAC filter
You can setup MAC filters to allow or deny wireless clients with known MAC addresses.
To setup MAC filter:
1. Click
Wireless -> MAC Filter
in the left side menu to open the configuration page.
2. Select the restriction mode for the filter: select
Allow
to allow the client and deny
the rest; select
Deny
to deny the client and allow the rest. By default, the filter is set
to
Disable
which allows all clients. Click
Add
to create a filter.
2. Type the MAC address of the wireless client you want to allow or block.
3. Press
Save/Apply
to save and activate the settings.
Wireless bridge
You can connect DSL-N13 to other wireless bridges so as to expand your wireless LAN.
This function is also refer to as Wireless Distribution System (WDS).
To setup WDS, the wireless routers must meet the following requirements:
1. Using the same encryption.
2. Working on the same channel.
3. The IP addresses of all wireless bridges are within the same subnet.
4. WDS enabled.
5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must
be saved to the
Remote Bridge List
. For uplink wireless router, MAC addresses of
all bridging router must be saved.
Example:
DSL-N13 (wireless bridge with Internet access), WL-500gP (wireless bridge),
and WL-500gD (wireless bridge). Refer to the illustration on the next page.
DSL-N13
WL-500gD
WL-500gP
SSID
ASUS
ASUS
ASUS
DHCP server
Enabled
Disabled
Disabled
LAN IP address
192.168.1.1
192.168.1.2
192.168.1.3
Authentication
Open
Open
Open
Encryption
WEP-128bit
WEP-128bit
WEP-128bit
Remote bridge
00:01:00:01:01:02
00:01:00:01:01:03
00:01:00:01:01:01
00:01:00:01:01:01
MAC address
00:01:00:01:01:01
00:01:00:01:01:02
00:01:00:01:01:03
Channel
11
11
11