Asus DS300j User Manual Download Page 24

Page: 24 / 56

ASUS Storage DS300j User Manual

Disk Drive LEDs

There are two LEDs on each drive carrier. They report the presence of a disk
drive, activity of the drive, and the drive

’s current condition.

Figure 3. Drive carrier LEDs

If there is a disk drive in the carrier, the Power/Activity LED displays green. If not,
the Power/Activity LED remains dark. The Power/Activity LED flashes during
drive activity.

The Disk Status LED displays green when a drive is configured.

If there is a disk drive in the carrier, the Power/Activity LED displays green. If not,
the Power/Activity LED remains dark.

The Power/Activity LED flashes during drive activity.

ASUS Storage DS300F or DS300I subsystem controls the Disk Status LED
behavior. The Disk Status LED displays green when a drive is configured.

LEDs

State

Dark

Steady

Green

Flashing

Green

Amber

Red

Power/

Activity

No Drive

Drive

Present

Activity

—

Status*

No Drive or

Unconfigured

Drive OK

Locating the

Drive

Rebuilding

Array Drive

Offline

* The RAID subsystem controls Disk Status LED behavior. The pattern

described here is from a ASUS Storage.

Disk Status

Power/Activiyt

Summary of Contents for DS300j

























































Search results

Summary of Contents for DS300j

Reviews:

Related manuals for DS300j

Brands by name

Popular brands

Asus DS300j, User Manual

Search results

Summary of Contents for DS300j

Reviews:

Related manuals for DS300j

Brands by name

Popular brands