Asus DS300j, User Manual

Page: 28 / 56

24
ASUS Storage DS300j User Manual
Controller temperature threshold : 71C/159F (critical)
61C/141F (warning)
===============================================================
ID
Location Voltage
===============================================================
1
I/O Module 4.825V
2 I/O Module 12.360V
---------------------------------------------------------------
Enclosure Settings List
The Enclosure command enables you to make settings for the enclosure.
•
Enclosure Warning Temperature
– Measured at the backplane. Fan speed
increases until temperature falls below the threshold.
•
Enclosure Critical Temperature
– Measured at the backplane.
Temperature value for automatic shutdown.
•
Controller Warning Temperature
– Measured inside the I/O module. Fan
speed increases until temperature falls below the threshold.
•
Controller Critical Temperature
– Measured inside the I/O module.
Temperature value for automatic shutdown.
•
Thermal Management
– Monitors enclosure temperature, adjusts fan
speeds, displays red LED on cooling unit when a fan fails
•
Automatic Shutdown
– Shuts down the ASUS Storage DS300j unit 30
seconds after the enclosure or controller reaches critical temperature.
•
Minimum Fan Speed
– Specifies the minimum fan speed when the ASUS
Storage reaches enclosure or controller warning temperature.
Making Enclosure Settings
To set the enclosure warning temperature to 51°C (141°F):
At the cli> prompt, type enclosure -a mod -s
“enc_warning=51”
and press
Enter.
Warning temperature range is 10° to 51°C (50° to 123°F)
To set the enclosure critical temperature to 61°C (141°F):
At the cli> prompt, type enclosure -a mod -
s “enc_critical=61”
and press
Enter.
Critical temperature range is 51° to 61°C (123° to 141°F)
To set the controller warning temperature to 51°C (141°F):
At the cli> prompt, type enclosure -a mod -s
“ctrl_warning=75”
and press
Enter.
Warning temperature range is 10° to 75°C (50° to 172°F)