Asus Crossblade Ranger, User Manual, Page: 99 / 177

ASUS CROSSBLADE RANGER
3-25
Chapter 3
3.6.6 APM Configuration
ErP Ready [Disabled]
Enable this item to optimize the power consumption at the S4 or S5 state to get the system
ready for the ErP requirement. The system in deep S4 or deep S5 state can be only woken
up via the power button. Configuration options: [Disabled] [Enabled(S4+S5] [Enabled(S5)]
Restore AC Power Loss [Power Off]
[Power Off] The system goes into OFF state after an AC power loss.
[Power On] The system goes into ON state after an AC power loss.
[Last State] The system goes into either OFF or ON state, whatever the system state
was before the AC power loss.
WOL (include AC Power Loss) [Disabled]
[Disabled] Disables Wake On LAN after a power failure (G3 state).
[Enabled] Enables Wake On LAN after a power failure (G3 state).
Power On By PME [Disabled]
[Disabled] Disables the PME to wake up by PCI/PCIE devices.
[Enabled] Allows you to turn on the system through a PCI/PCIE LAN or modem card.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
[Enabled] Generates a wake event and configure the real-time clock (RTC) alarm
date.