Asus Crossblade Ranger User Manual Download Page 133

Page: 133 / 177

4-12

Chapter 4: Software support

Chapter 4

Click to select a USB device

Click to enable the USB

device’s normal data

transfer rate

Click to enable UASP or

Turbo Mode to the USB

device for a faster data

transfer rate

USB 3.0 Boost

USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically

speeds up the transfer rates of your USB storage devices.

Launching USB 3.0 Boost

To launch USB 3.0 Boost, click or tap

on the top-right corner of the AI Suite 3 main

menu, then select

USB 3.0 Boost

Using the USB 3.0 Boost

•

USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a

list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com.

•

The data transfer speed varies with USB devices. For a higher data transfer

performance, use a USB 3.0 device.

Ensure to connect your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost.

Refer to the

Rear I/O connection section

of your user guide for more details.

Summary of Contents for Crossblade Ranger


















































































































































































Search results

Summary of Contents for Crossblade Ranger

Reviews:

Asus Crossblade Ranger, User Manual, Page: 133 / 177

Search results

Summary of Contents for Crossblade Ranger

Reviews: