manualshive.com logo in svg

Asus AX-125, Quick Installation Manual

The Asus AX-125 is a cutting-edge device designed to enhance your network connection. This high-performing router provides seamless internet access in your home or office. Ensure a hassle-free setup with the user-friendly Quick Installation Manual, available for download free of charge from our website manualshive.com.

Share
Download
background image

AX-125/145 SIP VoIP Router  Quick Installation Guide

32

2.  Configure the following settings:

  • 

Remote management

: Enable/Disable Internet access from WAN side.

NOTE

: Although it is convenient to access AX-125/145 from WAN side,  it also 

leaves the system open to hackers.

 
  • 

WEB access authentication

: When you have enabled it, you need to enter 

the account name and password for web authentication.

3.  When done, click 

Apply

 to save the settings.

3.8.3   Firmware upgrade

To upgrade the firmware

1.  From the menu, click 

Management -> Firmware Upgrade

. The Firmware 

Upgrade screen is displayed.

2.  Browse for the firmware file.

3.  When done, click 

Apply

.

WARNING

: Do not turn off the AX-125/145, or disconnect the Ethernet cable 

while the device is upgrading its firmware. Any interruption during the upgrading 

process could damage the AX-125/145's flash file system.

Summary of Contents for AX-125









































Reviews:

No comments

Related manuals for AX-125

Brands by name

Popular brands

Load more brands