AX-125/145 SIP VoIP Router Quick Installation Guide
8
Table 1: IVR command codes
Code
Status
Function
****
Main Menu
Enables you to enter the IVR menu.
Main
Menu
100# Network Status Gives you the WAN IP and SIP registration
status.
200#
LAN Config
Configure LAN interface.
Sub-
Menu
201#
Gives you the LAN IP and LAN netmask status.
202#
Enables you to set the LAN IP.
For example, to set LAN IP to “192.168.10.1”,
enter
192*168*10*1#
203#
Enables you to set the LAN netmask.
For example, to set the LAN netmask to
“255.255.255.0”, enter
255*255*255*0#
#
A single
#
takes you back to the Main Menu.
Setting up your IP address
To obtain an IP address automatically
Basically, setting your Network Interface to "
Obtain an IP address automatically
"
enables you to obtain an IP address via the DHCP protocol. Otherwise, you must
configure your Network Interface manually.
To configure an IP address manually
To set your IP address manually, you need to know the following settings:
Microsoft Windows XP [Version 5.1.2600]
<C> Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\louie_chavez>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix
.:
IP Address....................... .: 192.168.1.101
Subnet Mask ......................: 255.255.255.0
Default Gateway ..................: 192.168.1.1
