Asus 90SV045A-M05CE0 User Manual Download

Page: 84 / 168

5-2

Chapter 5: BIOS Setup

5.1

Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard Basic Input/Output

System (BIOS) setup:

ASUS CrashFree BIOS 3

To recover the BIOS using a bootable USB flash disk drive when the BIOS file fails or

gets corrupted.

ASUS EzFlash

Updates the BIOS using a USB flash disk.

3. BUPDATER

Updates the BIOS in DOS mode using a bootable USB flash disk drive.

Refer to the corresponding sections for details on these utilities.

Recovering the BIOS from a USB flash drive

To recover the BIOS from a USB flash drive:

Insert the USB flash drive with the original or updated BIOS file to one USB port on the

system.

The utility will automatically recover the BIOS. It resets the system when the BIOS

recovery finished.

DO NOT shut down or reset the system while recovering the BIOS! Doing so would cause

system boot failure!

The recovered BIOS may not be the latest BIOS version for this motherboard. Visit the

ASUS website at www.asus.com to download the latest BIOS file.

Save a copy of the original motherboard BIOS file to a bootable USB flash disk drive in

case you need to restore the BIOS in the future. Copy the original motherboard BIOS using

the BUPDATER utility.

5.1.1

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file

when it fails or gets corrupted during the updating process. You can update a corrupted BIOS

file using a USB flash drive that contains the updated BIOS file.

Prepare a USB flash drive containing the updated motherboard BIOS before using this

utility.

Summary of Contents for 90SV045A-M05CE0









































































































































































Search results

Summary of Contents for 90SV045A-M05CE0

Reviews:

Related manuals for 90SV045A-M05CE0

Brands by name

Popular brands

Asus 90SV045A-M05CE0, User Manual

Search results

Summary of Contents for 90SV045A-M05CE0

Reviews:

Related manuals for 90SV045A-M05CE0

Brands by name

Popular brands