Asus 90SV045A-M05CE0 User Manual Download

Page: 124 / 168

5-42

Chapter 5: BIOS Setup

5.9

Save & Exit menu

The Exit menu items allow you to save or discard your changes to the BIOS items.

Pressing <Esc> does not immediately exit this menu. Select one of the options from this

menu or <F10> from the legend bar to exit.

Discard Changes and Exit

Exit System setup without saving any changes.

Save Changes and Reset

Reset the system setup after saving the changes.

Restore Defaults

Restore/Load default values for all the setup options.

Boot Override

These items display the available devices. The device items that appear on the screen

depend on the number of devices installed in the system. Click an item to start booting from

the selected device.

Launch EFI Shell from filesystem device

Attempts to launch EFI Shell application (Shell.efi) from one of the available filesystem

devices.

Summary of Contents for 90SV045A-M05CE0









































































































































































Search results

Summary of Contents for 90SV045A-M05CE0

Reviews:

Related manuals for 90SV045A-M05CE0

Brands by name

Popular brands

Asus 90SV045A-M05CE0, User Manual

Search results

Summary of Contents for 90SV045A-M05CE0

Reviews:

Related manuals for 90SV045A-M05CE0

Brands by name

Popular brands