Asus 90SF0071-M00360 User Manual Download Page 31

Page: 31 / 202

2-3

ASUS ESC4000 G4 Series

A protection film is pre-attached to the system cover before shipping. Please remove the

protection film before turning on the system for proper heat dissipation.

To remove the middle chassis cover:

Press the cover latches down on both sides of the middle chassis cover.

Lift the chassis cover to completely remove it from the chassis.

To remove the front chassis cover:

Push and hold the cover buttons down.

Slide the chassis cover towards the front to disengage it from the chassis and lift the

chassis cover to completely remove it from the chassis.

Summary of Contents for 90SF0071-M00360











































































































































































































Search results

Summary of Contents for 90SF0071-M00360

Reviews:

Related manuals for 90SF0071-M00360

Brands by name

Popular brands

Asus 90SF0071-M00360, User Manual

Search results

Summary of Contents for 90SF0071-M00360

Reviews:

Related manuals for 90SF0071-M00360

Brands by name

Popular brands