Asus 90SF0071-M00360 User Manual Download Page 148

Page: 148 / 202

5-32

Chapter 5: BIOS Setup

5.7.4

Memory Configuration

Enforce POR [Auto]

Allows you to enforce POR restrictions for DDR4 frequency and voltage programming.

Configuration options: [Auto] [POR] [Disabled]

Memory Frequency [Auto]

Allows you to select the memory frequency setting.

Configuration options: [Auto] [1800] - [3000-OvrClk]

Data Scrambling for DDR4 [Auto]

Allows you to enable or disable data scrambling.

Configuration options: [Auto] [Disabled] [Enabled]

Memory Topology

Displays memory topology with DIMM population information.

Page Policy

Allows you to configure Page Policy settings.

Page Policy [Disabled]

Configuration options: [Auto] [Closed] [Adaptive]

Memory Map

IMC Interleaving [Auto]

Select different IMC interleaving setting.

Configuration options: [Auto] [1-way Interleave] [2-way Interleave]

Channel Interleaving [Auto]

Select different channel interleaving setting.

Configuration options: [Auto] [1-way Interleave] [2-way Interleave]

[3-way Interleave]

Summary of Contents for 90SF0071-M00360











































































































































































































Search results

Summary of Contents for 90SF0071-M00360

Reviews:

Related manuals for 90SF0071-M00360

Brands by name

Popular brands

Asus 90SF0071-M00360, User Manual

Search results

Summary of Contents for 90SF0071-M00360

Reviews:

Related manuals for 90SF0071-M00360

Brands by name

Popular brands