Asus 90SF0071-M00360 User Manual Download Page 136

Page: 136 / 202

5-20

Chapter 5: BIOS Setup

PCI Express Link Register Settings
ASPM Support [Disabled]

Allows to set the ASPM level. Configuration options: [Disabled] [Auot] [Force L0s]

[Force L0s]

Force all links to L0s state.

[Auto]

BIOS auto configure.

[Disabled]

Disabled ASPM.

Unpopulated Links [Keep Link ON]

In order to save power, software will disable unpopulated PCI Express links, if this

option set to Disabled.

Configuration options: [Keep Link ON] [Disabled]

PCIE OPROM Slot Options

PCIE1-3 Slot OPROM [Enabled]

This option allows you to enable or disable the OPROM of the PCIe slots.

Configuration options: [Disabled] [Enabled]

MEZZ1 Slot OPROM [Enabled]

This option allows you to enable or disable the OPROM of the MEZZ slot.

Configuration options: [Disabled] [Enabled]

Summary of Contents for 90SF0071-M00360











































































































































































































Search results

Summary of Contents for 90SF0071-M00360

Reviews:

Related manuals for 90SF0071-M00360

Brands by name

Popular brands

Asus 90SF0071-M00360, User Manual

Search results

Summary of Contents for 90SF0071-M00360

Reviews:

Related manuals for 90SF0071-M00360

Brands by name

Popular brands