1-1
1
ProArt B660-CREATOR D4
Product Introduction
1.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
The pin definitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.
1.2
Motherboard overview
Place this
side towards
the rear of the
chassis
DDR4 DIMM_A1 (64bit, 288-pin module)
DDR4 DIMM_A2 (64bit, 288-pin module)
DDR4 DIMM_B1 (64bit, 288-pin module)
DDR4 DIMM_B2 (64bit, 288-pin module)
LGA1700
CHA_FAN1
CPU_FAN CPU_OPT
AIO_PUMP
COM_DEBUG
M.2_3(SOCKET3)
M.2_2(SOCKET3)
M.2(WIFI)
M.2_1(SOCKET3)
M.2_1(SOCKET3)
PANEL
AAFP
COM
ATX_12V_1
ATX_PWR
PD_12V_PWR
U32G2X2_C1
U32G1_910
Intel
®
B660
Intel
Ethernet
RTL
Ethernet
BATTERY
HDMI_DP_IN
USB_E5678
LAN2_U32G1_E34
LAN1_U32G1_E12
Super
I/O
2280
2260
2242
PCIE
SATA
4.0 X4
X
M.2_2(SOCKET3)
PCIE
SATA
Optane Memory
3.0 X4
V
X
M.2_3(SOCKET3)
PCIE
SATA
Optane Memory
4.0 X4
V
X
SPI_TPM
2280
22110
22110
2260
2242
2280
22110
2260
2242
PCIEX1(G3)
PCIEX16(G3)
PCIEX16(G5)
USB_56
USB_78
Audio Codec
U32G2_C3
30.5cm(12in)
SATA6G_12
SATA6G_34
256Mb
BIOS
TB_HEADER
RGB_HEADER
ADD_GEN 2_1
ADD_GEN 2_3
ADD_GEN 2_2
ATX_12V_2
PLUG_8PIN_PWR
DIGI+
VRM
CHA_FAN4
CHA_FAN3
CHA_FAN2
CLRTC
T_SENSOR
24.4cm(9.6in)
CPU
DRAM
VGA
BOOT
AUDIO
9
8
6
7
17
13
21
11
5
20
14
15
3
5
22
2
1
4
12
4
11
19
18
10
4
4
16
3
6
