1-2
1.2.1 Layout contents
1. CPU socket
The motherboard comes with a surface mount Intel
®
Socket LGA1700 designed for 12
th
Gen
Intel
®
Core™, Pentium
®
Gold and Celeron
®
Processors.
For more details, refer to
Central Processing Unit (CPU)
.
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to
System memory
.
3. Expansion slots
This motherboard supports two PCIe x16 graphics cards and one PCIe x1 network card,
SCSI card or other card that complies with the PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
Header
Max.
Current
Max. Power
Default Speed
Shared
Control
CPU_FAN
1A
12W
Q-Fan Controlled
A
CPU_OPT
1A
12W
Q-Fan Controlled
A
AIO_PUMP
1A
12W
Q-Fan Controlled
-
CHA_FAN1
1A
12W
Q-Fan Controlled
-
CHA_FAN2
1A
12W
Q-Fan Controlled
-
CHA_FAN3
1A
12W
Q-Fan Controlled
-
CHA_FAN4
1A
12W
Q-Fan Controlled
-
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
•
If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power
or above to ensure the system stability.
6. M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
FAN PWM
FAN IN
FAN PWR
GND
GND FAN PWR FAN IN FAN PWM
Chapter 1: Product Introduction
