Asus 90MB19F0-M0EAY0, Manual

Page: 13 / 40

1-3
• Intel ® 12 th Gen Processors
M.2_1 slot (Key M), type 2242/2260/2280/22110
- Intel
®
12
th
processors support PCIe 4.0 x4 mode
• Intel
®
B660 Chipset
M.2_2 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 3.0 x4 mode)
M.2_3 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 4.0 x4 mode)
• M.2_2 slot shares bandwidth with PCIE X1 and WiFi Key E slot. M.2_2 will run at PCI
3.0 x2 mode when either a device is detected at PCIE x1 or WiFi Key E.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
8. USB 3.2 Gen 2x2 Type-C ® connector (supports USB Type-C ®
with 60W PD3.0/QC4.0+)
The USB 3.2 Gen 2x2 Type-C ® connector allows you to connect a USB
3.2 Gen 2x2 Type-C
®
module for additional USB 3.2 Gen 2x2 ports on
the front panel. The USB 3.2 Gen 2x2 Type-C
®
connector provides data
transfer speeds of up to 20 Gb/s and PD 3.0/QC 4.0+ support for up to
DC 60W fast charging technology.
• The USB 3.2 Gen 2x2 Type-C
®
module is purchased separately.
• For PD 3.0/QC 4.0+ support, ensure to connect the 6-pin PD_12V_PWR connector.
• PD 3.0/QC 4.0+ up to DC 60W fast charging technology is only supported on CC
Logic Devices. In S5 (Soft Off State), PD 3.0/QC 4.0+ only provides power delivery of
up to 7.5W.
9. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen
1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
10. USB 2.0 headers
The USB 2.0 headers allow you to connect a USB module for additional USB
2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s.
DO NOT connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
The USB 2.0 module is purchased separately.
11. Addressable Gen 2 headers
The Addressable Gen 2 headers allow you to connect individually addressable
RGB WS2812B LED strips or WS2812B based LED strips.
USB3+5V
IntA_P1_SSRX-
IntA_
GND
IntA_P1_SSTX-
IntA_
GND
IntA_P1_D-
In
GND
PIN 1
USB3+5V
IntA_P2_SSRX-
IntA_
GND
IntA_P2_SSTX-
IntA_
GND
IntA_P2_D-
In
USB+5V USB_P1- GND NC
USB+5V USB_P2-
GND
PIN 1
ADD_GEN 2
+5V
Data
Ground
PIN 1
ProArt B660-CREATOR D4