Astute Medical ASTUTE140, User Manual, Page: 39 / 86

ASTUTE140 ® Meter
Installation
©Astute Medical, Inc. 2021 PN 300005 Rev G 2021/03/03
39
3. Press the right soft key to display the Supervisor Menu .
4. When the Supervisor Menu is displayed, use the key to highlight Manage Users and
press the right soft key.
5. The Existing User List screen displays a list of users that have been registered to operate
the ASTUTE140
®
Meter with the user ID number, name and mode of operation (Supervisor
vs. Operator user).
To add a new user:
1. From the existing user list, press the right soft key to display the Options
pop-up menu.
2. When the Options pop-up menu is displayed, Edit User is highlighted. Use the key
to highlight Add User and press the right soft key.
3. When the Create New User screen is displayed, Mode is highlighted. Use the
keys to toggle between Supervisor and Operator .
4. To enter a user name, press the key to highlight Name . Use the numeric keypad or
an external keyboard (if connected) to enter the user name.
5. To enter the ID, use the key to highlight ID (numeric). Use the numeric keypad or
an external keyboard (if connected) to enter the desired ID. NOTE: The ID must be
numeric.
6. To enter the password, use the key to highlight Password . Use the numeric keypad
or an external keyboard (if connected) to enter the password.
7. After the password is entered, use the key to highlight Confirm Password . Use the
numeric keypad or an external keyboard (if connected) to re-enter the password entered
above.
8. Once all of the entries have been confirmed, press the right soft key to accept all
entries. To discard all entries and return to the Existing User list, press the left soft key.
To edit the information for an existing user:
1. Use the keys to highlight the user information to be edited and press the right
soft key to display the Options pop-up menu.
2. When the Options pop-up menu is displayed, Edit User is highlighted. To edit the user
information, press the right soft key.
3. When the Change User screen is displayed, Mode is highlighted. The current user
mode (Supervisor or Operator) is displayed. To change the user mode, use the
keys to toggle between Supervisor and Operator .