ASTRO AstroJet 1000, Installation And Operating Manual

Page: 44 / 57

40
Software continued…
ERROR MESSAGE PROBLEM SOLUTION
New Fields missing from layout
screen. Continued… Fields not visible in blotter area
on Layout Screen. Right click on one of the fields
that has already been
positioned and click OK on the
field property sheet an they
should re-appear Right click on
one of the fields that has
already been positioned and
click OK on the field property
sheet an they should re-
appear
Printing in Wrong Location on
the mailing piece Printing too far to the Left or
Right. Make sure that the size of the
mailing piece entered in the
Setup Menu is correct.
Make sure that the piece on the
Layout Screen looks EXACTLY
the way you want your piece to
look. Use the rulers to verify
that the fields are located the
proper number of inches form
the edges.
Adjust the left margin setting.
Check the product detection
sensor to verify that it is
properly aligned.
Printing Too High or Low Check image on layout screen.
Adjust the paper guide, or
individual printheads on their
mounting brackets to adjust
how far from the bottom edge
of a piece the fields are printed.