7
Introduction
Thank you for your purchase. We appreciate
your business!
Please carefully read and follow all instructions in this manual.
Pay special attention to all warnings and safety information.
Following these safety, care, and operation instructions will
help ensure many years of dependable and enjoyable service
from your fireplace.
Register your product online today!
To help us keep you up-to-date on product information and
offers, please take a few moments to register your product
online at www.Astria.US.com
(Owner Resources/Product
Registration).
Please read and understand these instructions before
installing or operating.
Product Overview
IHP Fireplaces are designed as factory-built blocks to be
assembled on-site. These fireplaces may be installed on ei
-
ther combustible or non-combustible floors. In order for the
fireplace to be installed on a combustible floor though, it is
necessary that the fireplace be supported on a platform or
sub-floor that is non-combustible.
The Four Components of the Grand Meridian Fireplace:
•
Combustible or Non-Combustible Floor
•
Non-Combustible Raised Platform
•
Grand MeridianFirebox and Smoke Dome
•
12DM listed chimney system required.
Important
: Follow the chimney pipe manufacturer’s
instructions on the installation of their specific flue system.
Careful step-by-step instructions for each phase of the
installation procedure will be given for the Grand Meridian
conventional radiant heat fireplaces. Those instructions
generally fall into the following categories:
•
Spacing and clearance as it relates to combustible
materials.
•
Familiarity of installation for all components.
•
The strength of the floor on which it rests.
•
Chimney system measurements.
•
Choice of materials and craftsmanship in fireplace and
hearth finishing.
Note that each of these topics will be covered in detail and that
the installer is expected to understand each phase completely
before going on to subsequent instructions.
Attention
: Be advised that all the illustrations in this manual
are for general reference only. Do not scale drawings. Actual
design elements will vary from case to case. Pay attention to
specified minimum clearances to combustibles.
Testing and listing for the Grand Meridian Fireplace has been
undertaken by PFS Inc. (Report No. 08-154) to UL 127.
Attention
: You may need a residential building permit to install
a Grand Meridian Fireplace. Consult local jurisdictions before
you get started!
If asked, advise the local authorities that the Grand Merid
-
ian Fireplace is designed for installation per the National Fire
Protection Association Standard for Chimneys, Fireplaces,
Vents and Solid Fuel-Burning Appliances (NFPA211).
When choosing the location of your Grand Meridian Fireplace,
keep in mind you must maintain 2” (two inches) minimum
clearance from left, right and rear of Fireplace to surrounding
structure. Also, when choosing a location, consider outside air
requirements to determine if it will be on the left or right side
of the Fireplace. In the case of an island installation, outside
air accessibility may be obtained through sub-flooring. See
section on Installing Outside Air on page 17.
Figure 8 - Typical Installations
Internal
Wall
Installation
Island
Installation
Product Overview