13
8. How to Remove and Attach Parts
1) The Arm
● The Arm holds the peeling blade. It can be removed and fully immersed for washing. When re-
moving the arm it is recommended that the fixing prong also be removed.
The peeler blades are extremely sharp.
Handle with care to avoid injuring your hands.
Warning!
1.
2.
3.
Turn the arm clockwise 90° by
hand.
Remove the spring hook at the
upper end from the arm.
Lift the arm up to remove it.
● To attach the arm, place the two holes at the base of the arm over the two pins on the arm holder,
then attach the hooked end(s) of the spring(s) to the groove(s) on the arm shaft.
If not properly attached, peeling cannot be performed well.
Arm base
Arm holder
Pins (two)
Standard Spring
(SP-S)
Arm Shaft
4. Return the arm counterclockwise 90° to the original position by hand. Listen for the “click” to verify that the arm is
in the correct position.
● If the arm does not return to the correct start position, peeling will not commence when the Start
button is pressed. “Arm position wrong - correct” will be displayed on the display screen. Adjust
the arm to the correct start position, and press the “Start” button.
Summary of Contents for FAP-1001
Page 43: ...42 MEMO ...
