manualshive.com logo in svg

Astra FAP-1001, Operation Manual

Share
Download
Astra FAP-1001 Operation Manual Download Page 32

31

8) [4 Peeling Finish]

●  Choose a setting based on the type and size of the item to be peeled.
  Peel Finish is a function of the Peeling Range and Peeling Direction. It can be set to change the 

arm speed (from the default in Standby mode.)

0°

45°

135°

180°

 Peeling range

●  Select this setting depending on the direc-

tion of the arm.
1. In the case of L > R peeling, the angle 

which determines the range of peeling 
can be adjusted from 135° to 180°.

 

2. In the case of R > L peeling, the angle for 

range of peeling can be adjusted from 0° 
to 45°.

 

1. [High Speed] mode

●  By increasing the feed speed of the arm at the end of peeling within the peeling range setting, the 

yield at the end of peeling is improved.

●  This mode is best used with such items as apples, Asian pears and potatoes.

4 Peeling Finish

High Speed

2. [Normal] (no change) mode

●  Makes the peeling thickness uniform without changing the feed speed of the arm at the end por-

tion of peeling within the the peeling range setting.

4 Peeling Finish

Normal

●  The display screens are switched in order using the buttons "

"  "

" on the operation panel.

4 Peeling Finish

High Speed

4 Peeling Finish

Normal

Button

Button

* Scroll thru menu.

Summary of Contents for FAP-1001













































Reviews:

No comments

Brands by name

Popular brands

Load more brands