Aston Global Wamba, User Manual

Page: 18 / 36

32
If in paragraph (2) you selected OK you can then refer to (1) of the same paragraph to set another pointing position.
If in the paragraph (3) you selected ESC , you only need to select the satellites from which you want to receive
channels.
• Move to SATELLITES ACTIVATION using (
쒀
and
쑽
) and then press OK .
Move within the list of satellites using (
쒀
and
쑽
) to select the required satellites and press CH+/CH- to confirm
your choice (marked YES).
All satellites marked “YES” will be used during channel scanning.
• Press OK to confirm all the selected satellites.
• Move to SAVE AND QUIT then press OK to confirm all previous settings.
5.3 INSTALLATION IN IF - IF MODE (Collective installation)
• Press MENU .
• Select INSTALLATION (
쒀
and
쑽
) and then press OK .
• Select ANTENNAS AND SATELLITES PARAMETERS and then press OK .
• Move to INSTALLATION TYPE and press CH+/CH- to select COLLECTIVE IF-IF
• Move to LNB POWER SUPPLY and press CH+/CH- to select YES or NO depending on your installation
settings (select NO if your LNB is externally powered).
• Press OK .
You can now proceed with automatic installation.
6. Automatic channels installation
6.1 Symbol rate update
• Press MENU on the remote control.
• Select INSTALLATION (
쒀
and
쑽
) and then press OK .
• Select SEARCH RATE UPDATE (
쒀
and
쑽
) press OK to confirm.
• Select the corresponding satellite (
쒀
and
쑽
).
• Press
쑺
to move to SYMBOL RATE FOR SEARCH. You have the choice between 1 and 8 symbol
rates per satellite. Each SYMBOL RATE can be declared active or non-active (except for the first one
which is always active). Each time a SYMBOL RATE is declared active for the selected satellite, it will
be used in the automatic channel installation.
• Press
쑸
to go back to the list of satellites.
• Repeat this operation for each satellite you want to scan.
• Press OK to save data and go back to the previous menu.
All the necessary settings for your receiver and installation configuration are now complete. You can now
proceed with an automatic channels scan and installation.
6.2 Automatic channels installation
• Press MENU on the remote control.
• Select INSTALLATION (
쒀
and
쑽
) and press OK to confirm.
• Select AUTOMATIC CHANNEL SEARCH (
쒀
and
쑽
) and press OK to confirm.
• Press OK to start the channel scanning.
33
You can at any time interrupt the automatic scanning by pressing ESC . You can resume and carry on the
scanning by pressing OK or ESC to stop and quit. All the channels already found will be saved.
• When the scanning is completed, press on ESC to save data and return to the previous menu.
N.B : Your receiver can receive a maximum of 4000 programs ( TV , RADIO and DATA included)
6.3 Channels update
This menu allows you to add, move, rename or delete channels or bouquets.
• Press MENU on the remote control.
• Select INSTALLATION (
쒀
and
쑽
) press OK to confirm.
• Select ADD A CHANNEL OR BOUQUET (
쒀
and
쑽
) press OK to confirm.
NB : You have the possibility to add TV, Radio and Data channels manually.
• Select TO THE TELEVISION LIST (
쒀
and
쑽
) press OK to confirm.
This menu shows a list of bouquets and the corresponding channels as well as an information window giving
all the parameters of the channel highlighted in yellow.
You can view the selected channel, free to air or scrambled if you have the subscription rights. (1)(2)
• To move between the bouquets and channels windows, press
쑸
and
쑺
• To delete a channel or a bouquet, select a bouquet or a channel (
쒀
and
쑽
), press DELETE to erase.
Repeat for each bouquet or channel. Press ESC to save the modification and return to the previous menu.
• To add a new bouquet, select bouquet window (
쑸
and
쑺
) , press ADD (red key), enter the corresponding
parameters and press OK . The new bouquet will be added to the list if found. If the bouquet already
exist only new channels will be added.
• To add a new channel, select the channel list window (
쑸
and
쑺
), press ADD (red key), enter the
corresponding parameters and then press OK . The new channel will added to the list if found.
• To move a channel or a bouquet, select a channel or a bouquet (
쑸
and
쑺
), press OK . The selected bouquet
or channel will be displayed in green.
Move the cursor (
쒀
and
쑽
) to the new position, press OK to insert.
Repeat for each channel or bouquet you want to move.
Press ESC to save modifications and return to the previous menu.
NB : Channels can only be moved within a bouquet. To move a channel to a desired position number, move
the bouquet first and then the channel.
• To rename a channel, select the channel window (
쑸
and
쑺
) select the channel (
쒀
and
쑽
), enter the new
name by typing directly into the alphanumeric keys of your remote control and confirm by pressing OK
or ESC if you do not wish to modify it.
• Proceed in the same fashion with the RADIO and DATA lists.
(1) Press ZOOM , to increase the picture size.
(2) Press LANG , to change the language when available.
(3) When moving a bouquet to a new position, all corresponding channels are automatically moved.
English