Astera LED Technology GmbH
Technical Reference Manual for FP1 Titan Tube 2020-08-26
Page | 43
8.11
R
UNTIME
The light is able to adjust its power to meet a certain runtime on
battery. The runtime is always calculated for a full battery.
Example:
If the light is required to light during an eight hour event,
and one hour of setup time is scheduled, then the
runtime should be set to nine hours immediately after the
first power up.
Please note, that the light should not be stored below 20°C
before an event, otherwise the runtime might be shorter than
calculated.
More details on the built-in battery can be found at chapter 4.2.
8.12
A
NTI
-F
LICKER
The AsteraApp has an Anti-Flicker function where the PWM rate of spotlights (AX3/5/7/10) can
be adjusted. For the Titan Tube this feature does not have any effect. The Titan Tube operates
on a scrambled PWM rate which does not cause flicker effects when being filmed.
