Astera LED Technology GmbH
Technical Reference Manual for FP1 Titan Tube 2020-08-26
Page | 20
7.10
S
TATUS
S
CREEN
The status screen is shown after power up. The light also returns to the status screen if no keys
are pressed for three minutes.
It shows:
•
In the FIRST line what input is currently active
•
In the SECOND line the current DMX and SET address
INPUT SELECT is set to AUTO and the light did not yet latch to
one input source.
The light is latched to APP CONTROL mode.
INPUT SELECT is set to STANDALONE. The light can no longer be
controlled by any wireless signal.
The light is latched to CRMX mode.
The light is latched to ART3 DMX mode.
Emergency light mode can be active because either AC FAIL
or DMX FAIL being set to EMERGENCY LIGHT.
The standby mode saves power; the light is off and waiting for
a “leave standby” command received by
the AsteraApp
™
.
Theft alarm is active.
If the AsteraApp is asking to “tap a light” and this is shown,
press the ENTER key shortly to accept.
Alternatively you can use an ARC1 infrared remote, aim it at
the light and press POWER ON to accept the setting.
INPUT: DETECTING
SET:001 DMX:001
APP CONTROL
SET:001 DMX:001
STANDALONE
SET:001 DMX:001
CRMX: SIGNAL 99%
SET:001 DMX:001
ART3: NO LINK
SET:001 DMX:001
EMERGENCY LIGHT
SET:001 DMX:001
STANDBY
SET:001 DMX:001
ALARM
DO NOT STEAL THI
ACCEPT CONFIG ?
SET:001 DMX:001
