INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 19
29.
Remove gold thumb screws that connect z-axis motor to bottom frame plate and
remove z-axis motor mount. Remove z-axis motor. Place z-axis motor mount on
bottom of z-axis motor and insert and tighten gold thumbscrews. Place lead screw knob
on top of lead screw and lightly tighten set screw. Store the z-axis motor in location as
shown in Case Layer Drawing 3.
30.
Remove green thumbscrews that attach printer legs to left and right side frames and
remove printer legs. Remove printer feet from printer legs and replace printer foot
mounting hardware back into the printer feet. Store green thumbscrews in plastic case
for z-axis and frame components as shown in Case Layer Drawing 1. Store printer feet
with mounting hardware in location as shown in Case Layer Drawing 4. Store printer
legs in location as shown in Case Layer Drawing 1.
