INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 14
21.
Remove x-axis motor and re-insert mounting hardware into the top of the motor with
the smallest screw in the front left corner. Coil wire around base of motor. Store the x-
axis motor in the location as shown in Case Layer Drawing 3.
22.
Remove lead screw knob by loosening set screw and set aside. Remove top frame plate,
lifting the bearing from the lead screw at the same time. Store flat head screws and
bearing in plastic case for z-axis and frame components as shown in Case Layer Drawing
1. Place top frame plate in location as shown in Case Layer Drawing 2.
