INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 12
19.
Remove the extruder bottom. Re-insert extruder bottom mounting hardware into the
same locations they were removed on the x-axis rail carriage and x-axis belt clamp;
longer screws should be inserted into the belt clamp. Remove x-axis limit switch from
extruder bottom and re-insert the screws into the limit switch with nuts on ends. Coil
limit switch wire and place in plastic box for x-axis components as shown in Case Layer
Drawing 1. Store extruder bottom in location as shown in Case Layer Drawing 1; the
extruder bottom should be placed below the extruder top and filament drive.
