INVENT3D Printer Kit Disassembly Instructions
AST2 © 10/26/16 17
26.
Remove y-axis plate by removing three flat head screws. Remove remaining idler bolts
and replace nuts on ends. Coil y-axis limit switch wire and pass plug end through the
coil so that it doesn’t become unraveled. Store idler bolts and flat head screws in plastic
case for y-axis components as shown in Case Layer Drawing 1. Place y-axis components
plastic box in location as shown in Case Layer Drawing 1. Place y-axis plate in location as
shown in Case Layer Drawing 3.
