AST Premmia PS Series User Manual Download

Page: 5 / 89

Premmia PS Series

Contents

An Overview ........................................................................................................................ 9

The Front of the Computer............................................................................................ 10

The Back of the Computer ............................................................................................ 13

Ergonomic Considerations ................................................................................................ 16

Arrange Your Work Environment .................................................................................. 16

Get Seated ................................................................................................................ 16

Typing........................................................................................................................ 17

Viewing the Monitor ................................................................................................... 17

Turning the Computer On and Off .................................................................................... 18

Powering the Computer................................................................................................. 18

Turning On the Computer ............................................................................................. 19

Using the Network to Turn On the Computer............................................................ 20

Turning On the Computer Via the Modem ................................................................ 21

Turning Off the Computer ............................................................................................. 22

Using Standby Mode ................................................................................................. 22

Restarting the Computer ........................................................................................... 22

Shutting Down the Computer .................................................................................... 23

Turning Off the Computer Manually .......................................................................... 23

Power Management .......................................................................................................... 24

ENERGY STAR, ACPI and APM .................................................................................. 24

Using Standby Mode ..................................................................................................... 25

Using Audio ....................................................................................................................... 26

Using the Diskette Drive.................................................................................................... 26

Standard Diskette Drive ................................................................................................ 27

SuperDisk Drive ............................................................................................................ 27

Using the Keyboard and Mouse ........................................................................................ 27

Using the MIDI/Game Port ................................................................................................ 28

Using a Modem ................................................................................................................. 28

Summary of Contents for Premmia PS Series


























































































Search results

Summary of Contents for Premmia PS Series

Reviews:

Related manuals for Premmia PS Series

Brands by name

Popular brands

AST Premmia PS Series, User Manual

Search results

Summary of Contents for Premmia PS Series

Reviews:

Related manuals for Premmia PS Series

Brands by name

Popular brands