Premmia PS Series
75
Error Message
Explanation
Keyboard error
The keyboard is not working; turn the computer off and
reconnect the keyboard.
Keyboard error
nn
The key with scan code
nn
is stuck; check to see if anything
is resting on the keyboard and that the keys look OK.
Operating system not
found
Check that the diskette, hard disk and optical drives are
correctly installed and identified in Setup.
Parity Check 1
Parity error found in the system bus. The computer
attempts to locate the address and display it on the screen.
If it cannot locate the address, it displays
????
.
Parity Check 2
Parity error found in the I/O bus. The computer attempts
to locate the address and display it on the screen. If it
cannot locate the address, it displays
????
.
Press <F1> to resume,
<F2> for Setup
Displayed after any recoverable error message. Press
F1
to
continue to start the computer or
F2
to enter Setup.
Real time clock error
Real-time clock failed. You may need to replace the battery
and run Setup to reconfigure the system.
Shadow RAM Failed at
offset: nnnn
The memory is not working properly. Make sure the
memory is the correct type and that it is installed correctly
(page 44).
System battery is dead -
Replace and run SETUP
The CMOS clock battery indicator shows the battery is
dead. Replace the battery and run Setup to reconfigure the
system.
System cache error -
Cache disabled
The processor cache failed and was disabled. You may need
to replace the processor module.
System CMOS
checksum bad - run
SETUP
System CMOS RAM has been corrupted or modified
incorrectly, perhaps by an application. Run Setup and
reconfigure the system either by getting the default values
and/or making your own selections (page 64).
System RAM Failed at
offset:
nnnn
The memory is not working properly. Make sure the
memory is the correct type and that it is installed correctly
(page 45).
