28
Use the Numeric keys to enter the GPIB Address, then press the ENTER key.
Change the GPIB address again or press the SETUP key to advance to the Memory
Lock parameter. Press the EXIT key to return to the operation mode. The program
will store the GPIB address automatically.
4.2.7. BUS Remote Command Set (unavailable with Option 02 Printer Card)
Press the SETUP key to advance the menu to the Command Set Format parameter.
The display will show:
Use the ENTER key to toggle the remote command set between 488.1 and 488.2.
Please refer to section
7.0. Bus Remote Interface USB/GPIB/RS232
for additional
information about this selection.
Change the BUS Remote Command Set again or press the SETUP key to advance to
the Memory Lock parameter. Press the EXIT key to return to the operation mode.
The program will store the BUS Remote Command Set automatically.
4.2.8. Memory Lock
Press the SETUP key to advance the menu to the Memory Lock parameter. The
display will show:
Use the ENTER key to toggle the Memory Lock ON and OFF.
Memory Lock is a sub-function of the Lock setting. In order for the Memory Lock
function to work, the Lock must first be turned ON. Selecting the Memory Lock OFF
will allow the user to access all available Memory locations but restricts access to
memory editing capabilities. Selecting the Memory Lock ON will allow the user to only
run the currently loaded memory.
Press the SETUP key to forward to the PLC Remote selection. Press the EXIT key to
return to the operation mode. The program will store the Memory Lock setting
automatically.
