9
An ASSA ABLOY Group brand
P/N AYRT-210-INST-FUL Rev E
9. Attach wire harness assembly to the interior escutcheon printed circuit board (PCB) by
lining up notches on top of connector to slots on PCB connector (Fig. 12 & 13).
Press connector in firmly using thumbs until completely seated (properly seated position
indicated by arrows on PCB as in Fig. 13).
10. Install and secure interior escutcheon to interior mounting plate using (4) M4 x 8mm
pan head machine screws through the interior escutcheon into the mounting plate
(see Fig. 14).
Thumbturn must be in vertical position
.
NOTE
: Verify that wire harness is not being pinched or damaged while installing
mounting screws.
Interior Escutcheon
Reset Button
Figure 13
Figure 12
Wire harness
Connector
Figure 14
Thumbturn in
vertical position
Install Interior Escutcheon
