12
An ASSA ABLOY Group brand
P/N AYRT-210-INST-FUL Rev E
90°
Figure 20
Figure 19
CCW
C. Ensure that cylinder key remains in
previously set vertical position (Fig. 19).
NOTE
: Hex set screw should be
inserted far enough for handle
to slide over shank, clearing
the set screw.
14. Push exterior lever handle over shank
until hole on handle aligns with set
screw in shank.
15. Secure lever handle by inserting hex key (Fig. 20)
and rotating set screw
counter-clockwise
(
CCW
).
This will retract the set screw back into the
lever handle to secure it.
Do not overtighten.
17. Rotate thumbturn counter-clockwise to horizontal position (Fig. 21).
Figure 21
Hex Lever
Set Screw
IMPORTANT: Test the lock's mechanical operation. Lift up and push down on lever
handle to retract the latch, ensuring that latch moves smoothly.
If operation is not smooth for these procedures, review the previous steps to ensure
proper installation, while maintaining proper alignment of escutcheons.
16. Turn key 90°
CCW to horizontal position regardless
of lever handing.
Pull to remove key (Fig. 20) and test operation of lever,
ensuring that latch moves smoothly.
A. Remove hex key.
